I love these loose-fitting, draped blouses as throw-overs for summer. The right hand one comes from one of my fav sites (Burda) offers free patterns.
They are such fun, and quickly give an updated look when popped over a tank and leggings. These are some pictures from various websites that I took inspiration from for a cropped batwing sleeve pattern I have called “Anne” after an old friend who was slightly “batty” (love her quirkiness)!
Here is my version, modeled by my favorite “tester” , who gets to try out my patterns and offer constructive comments. It is apparently versatile and comfy to wear. Download the pattern from the “Box” widget in the right hand side bar.
It is super easy to make. I purchased 60 centimeters (or 0.6 m) of sheer fabric for this project – a lovely chiffon which has a lovely drape. It was a very wide fabric, so you may need more if your fabric is narrower.
I think any lightweight, sheer fabric that has a nice drape would be good for this. Chiffon is quite pricey ($15 per meter) but you could also try making it from a remnant, a fine old table cloth or sheer / lacy curtain. After I made this (dang), I saw a beautiful size XXXL chiffon dress ($5) in the TS *recently that would have probably made 2 of these. The large size clothing and night wear racks are always “happy hunting grounds” for fabric. *(I’m going to say “Thrift Store” so often I may as well start abbreviating it!)
The neck opening is quite scooped so it does end up quite large – don’t enlarge it or it may fall off the shoulder! Meryl likes the scooped neck, because if she wants to, she can pull it down at the back, making the front extra cropped showing some midriff. The neckline then fits at the neck base, with the back draped asymmetrically. She also pulls it to one side sometimes, exposing one shoulder.
I used a serger (overlocker in South Africa) for the seams, but if you have a regular machine, try doing a french seam when sewing these very fine sheer fabrics. (Instructions here or http://www.sewneau.com/how.to/french.seam.html
Here is the free pattern if you’d like to try it. Anne top Pattern or Download the pattern from the “Box” widget in the right hand side bar.–>
Print it off and join the pieces together , matching the symbols. Both pattern pieces are placed on the fold along their center line.
I didn’t take any photos of the sewing process, so I cannot post “How to” pics, but if you would like me to, please leave a comment.
It only has 2 seams (shoulder and underarm), and the arm and waist edges are just hemmed with a narrow hem. If you have a roll-hemmer setting on your serger , you could use that to finish the edges instead – it depends what look you like.
1. Sew ONE shoulder seam together. This fabric was VERY slippery to sew, so I actually “cheated” a bit, and did not cut the shoulder seam for this particular top, but just put the pattern on the fold of the fabric. I folded the fabric in half , then half again, and basically cut a hole for the neck. The shape of the garment would be better with a shaped shoulder seam though.
2. Bind the neck opening (**remember it’s always easier to work flat than once the other shoulder seam is sewn) I just serged the edge of the neckline and turned it under, and sewed it down (since this was just a “test”), but I think it would look better bound with bias binding in the same fabric. (see earlier “Meryl” top for Bias Binding Tutorial)
3. Sew the other shoulder seam together.
3. Sew the arm hems. Ditto for comment above**. You could also thread elastic or a cord / ribbon through the arm hem if you want it to gather up slightly, but if you decide to do that, sew the underarm seams first so the armhole is a continuous loop.
4. Sew the underarm seams. Hem the lower edge with a narrow hem. Alternately you could add on another 2 inches in the length and make the hem much wider.
Press all seams down so the lie flat….and you’re done!
I hope you like it. In my next post I will show you another version with a collar that I made for a friend Tammy.